Do you know the inspection methods for generator set overheating? 

We all understand the importance of generator inspections, but do we know what to do when a generator overheats? 

Guangdong Longhong Power Machinery Equipment Co., Ltd., a generator manufacturer, will explain the steps as follows:

Generator Overheating Faults: 

1. Generator overload  

2. Low load power factor  

3. Low rotational speed  

4. Blockage in generator ventilation ducts  

5. Partial short circuit in generator windings  

Inspection and Treatment Methods: 

1. Reduce the load to within the rated value  

2. Adjust the load to ensure the excitation current does not exceed the rated value  

3. Adjust the rotational speed  

4. Inspect the ventilation ducts and remove any blockages in the generator set  

5. Locate and address the short circuit point  

After inspecting and addressing these issues, the generator can be used normally.  

The above content is compiled and published by the generator manufacturer—Guangdong Longhong Power Machinery Equipment Co., Ltd. 

For more details, visit https://www.longhongpower.com.